Unsolved
This post is more than 5 years old
2 Posts
0
431
March 2nd, 2009 07:00
Retrieving Enginuity version information with SE
Hello,
Not sure if this question has already been posted but would appreciate any information / help / direction please
I would like to be able to gather the full Enginuity code revision and patch level using an SE command from a host.
At the moment I'm just using "symcfg -sid xx list -v" which gives the code level such as 5773.130.90 and a micro code date.
However we have recently been made aware that versions such as 5773.130.90 also have patches (E-Pack!?) which are not reflected in the SE output that I'm using
Is there a command that will capture this information? - I'm not too worried about the format as we can cobble together a script to suit
Thanks for your help in advance
/Pete
Not sure if this question has already been posted but would appreciate any information / help / direction please
I would like to be able to gather the full Enginuity code revision and patch level using an SE command from a host.
At the moment I'm just using "symcfg -sid xx list -v" which gives the code level such as 5773.130.90 and a micro code date.
However we have recently been made aware that versions such as 5773.130.90 also have patches (E-Pack!?) which are not reflected in the SE output that I'm using
Is there a command that will capture this information? - I'm not too worried about the format as we can cobble together a script to suit
Thanks for your help in advance
/Pete
No Events found!
xe2sdc
2 Intern
•
2.8K Posts
0
March 2nd, 2009 08:00
AFAIK Epacks and fixes can be listed only using symwin and inlines.
No way to fetch similar details via CLI.
PeteC3
2 Posts
0
March 2nd, 2009 08:00
Thanks for the welcome and the response!
It's a shame about SE not being able to collect the detail will check-out those other utils you mentioned
Thanks again!
Cheers /Pete
xe2sdc
2 Intern
•
2.8K Posts
0
March 2nd, 2009 08:00