Problems with Licensed Feature Codes

Greetings & welcome to the forums Avdeenok,

I poked around a little and it looks to me like you don't actually have the (relevant) feature code(s) ... As you certainly know, v7.0 is substantially different. If you have the LFC's in the SCFINI data set, and you started the product(s) with that updated & current data set then ...

You should have been delivered license codes if you got a 'kit' from EMC, however, if you did a download of the product, you may not have gotten them?

I have 2 suggestions to pursue this.
1: Your EMC Sales Rep.
2: License@emc.com

Between them they should be able to clarify this.
You probably already know this but just in case, the relevant manual section is
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Technical_Documentation/300-008-953.pdf#page=18

I hope this helps. Please update us here.

Best regards,
Dave Yates
EMC TSE3
Benevolent Host S/W & Mainframe Forum Moderator

Hi,

just a question. Dis you restart SCF after installing new LFC? Normally when start SCF you must have a message saying Snap is active

SCF2023I SCFGBLSN MODULE FOUND, LFC WAS SPECIFIED, SNAP V5.7 ACTIVE .

I don't have snap version 7, but i think you have this king of message when you start SCF and LFC is correct.

hope it's can help you. Have a nice day and........:) good snaps.

Hello and thank you for quick reply! I got this software from my head office. I will get more details about license and tell you.

Hello! Yes, I've restarted EMCSCF, and i got another message: SCF0580I LFC ******** (SNAP VIRTUAL) FEATURE ENABLED.

It looks like at least some progress here, how are things now?

Dave Yates
EMC TSE3
"Il Moderatore Benevolo"
Benevolent Host S/W & Mainframe Forum Moderator

Problem solved. Thank you for Assistance!