Unsolved
This post is more than 5 years old
14 Posts
0
696
October 16th, 2007 13:00
HP-UX and DMx-2000S-M2
hello ,
Someone know why all my HP-UX servers connected to a DMx-2000 , there is a IO Wait of 5ms ?
Is there any kernel parameters to do in the server or in the DMX 2000?
Someone know why all my HP-UX servers connected to a DMx-2000 , there is a IO Wait of 5ms ?
Is there any kernel parameters to do in the server or in the DMX 2000?
No Events found!
xe2sdc
2 Intern
•
2.8K Posts
0
October 17th, 2007 02:00
2) do you feel that 5ms are a long wait so you want to reduce this wait ??
RitaWorkman
20 Posts
0
October 17th, 2007 11:00
Honestly, there's not enough info to venture a response.
Sorry......more info might help folks to respond.
Regards,
Rita
MrTS2Symm
113 Posts
0
October 18th, 2007 06:00
Agree with others that more information about your configuration is needed to give you an accurate and intelligent replies.
From what level of HP-UX, topology infrastructure, volume management and device protection.
A lot of help that you can tap into here and a willingness of help from a lot too.
Michael
xe2sdc
2 Intern
•
2.8K Posts
0
November 16th, 2007 02:00
MrTS2Symm
113 Posts
0
November 16th, 2007 06:00