How can I get a copy of Primus KB article emc95302?

Is this the one you require?

The following is a Primus(R) eServer solution:

ID: emc95302
Domain: EMC1
Solution Class: 3.X Compatibility

Goal How do I find out if I have any available gatekeepers left?

Goal How do I find gatekeepers with command line Solutions Enabler

Goal How do I find gatekeepers

Goal Command to locate free gatekeepers

Goal What do I do if I run out of available gatekeepers?

Fact EMC SW: EMC ControlCenter

Fact EMC SW: Solutions Enabler SYMCLI

Symptom No gatekeeper devices available when attempting to establish a configuration lock

Symptom EMC ControlCenter alert: no gatekeeper devices are available

Symptom EMC ControlCenter alert: 1 gatekeeper available

Symptom Solutions Enabler complains that no gatekeeper devices are available

Symptom Error msg: Error opening the gatekeeper device for communication to the Symmetrix

Cause A configuration lock is already set on the Symmetrix

Cause No gatekeepers are assigned to the host running the Storage Agent for Symmetrix

Cause No available gatekeepers

Cause Only 1 available gatekeeper left

Fix
Steps to resolve the issue:

This command will return a list of Symmetrix arrays and their current configuration lock status: symcfg -lockn 15 list. See solution emc91997 if the status is LOCKED.
Assign Gatekeeper devices to the host. This command will list all the devices with a capacity of 3 MB which is the normal size of a gatekeeper that are not assigned to any host: symdev list -sid xxxx -CAP 3 -noport. See solution emc100397 to map devices with Solutions Enabler or emc78806 to map devices with EMC ControlCenter.
NOTE: If no devices appear in the list, there may be no available gatekeeper devices. For information on creating new gatekeeper devices, see emc102144.


Note The following error is found in the SYMAPI log file:

08/17/2004 00:00:13.000 2668 3192 EMC:ECC SymDiscover() Function start
08/17/2004 00:00:14.000 2656 1688 EMC:ECC SymDiscover() Function start
08/17/2004 07:32:29.000 2668 3352 EMC:ECC iCfgChgSessionStart Starting a local cfg chg session for SID 000XXXXXXXXX, symapi V5.0-278
08/17/2004 07:32:29.000 2668 3352 EMC:ECC cfgOpenGatekeeper Error opening the gatekeeper device for communication to the Symmetrix



Note
Receive following error in ControlCenter or Solutions Enabler when attempting to acquire a configuration lock:

Error opening the gatekeeper device for communication to the Symmetrix

You guys are very good.

Should you ever get a "primus" or KB / knowledgebase article reference in the future, you can use this URL prefix to get to it:

http://csgateway.emc.com/primus.asp?id=

in your case, http://csgateway.emc.com/primus.asp?id=emc95302

Hope this helps!

Dave Yates
EMC TSE3
Benevolent Host S/W & Mainframe Forum Moderator
"Il Moderatore Benevolo"

Nice ! And it works for me, too!
Now I miss only a tool to dig into Primus

That is correct, and we do try to be cognizant of the issue but sometimes we don't see the audience or secured data.

Generally, EMC wants to push information to be viewable to the customer especially information that can help you figure out configuration, setup, common issues, tips & tricks, or problems.  We author these knowledgebase articles with that principle in mind.  The author submits it to be technically reviewed by a colleague.  Many of us here on the Forums perform that work.  Many of us have rejected or sent back articles because they were restricted and should have been customer viewable and sometimes the opposite if the circumstances are particularly intricate and could cause a DU/DL situation.  However, even those situations we make a serious effort to have public (that is customer viewable) information about an issue.  We a great deal of flexibility in securing data in our knowledgebase articles, right down to the statement.

If you get a link to a knowledgebase article and cannot view it, I suggest you open a service request for the product in question to discuss the issue with EMC Support.

If it looks incomplete, we can review the KB Article here and see if it perhaps has some secured data in the article.  If so, again we would almost certainly want to refer you to a service request so that the correct resource from EMC can guide you appropriately.

Please don't hesitate to ask right here on the forums too.  Thanks for reminding us of this.

Best regards,

Dave Yates

EMC TSE3

Benevolent Host Systems Moderator

"Il Moderatore Benevolo"

It asking about user name and password.

Which user name and password i have to give..........