Unsolved
This post is more than 5 years old
2 Intern
•
309 Posts
0
1184
September 14th, 2011 11:00
Driver fault 0X9E on Win2K8R2
Hello,
I have a few IBM servers running Win2k8R2 with Emulex cards using driver 4.21003. I get a driver fault 0X9E. These servers have different HBAs with different firmware. Hardware different but operating system and Emulex driver the same. Has anyone seen this problem?
Thanks.
No Events found!
Mich
86 Posts
0
September 14th, 2011 23:00
Check the driver against the recommended one here for your HBA.
http://www.emulex.com/downloads/emc.html
Regards, Michel.
DanPJ
2 Intern
•
309 Posts
0
September 15th, 2011 05:00
I did. Recommended is 2.41.003 which we are running.
Thanks.
Mich
86 Posts
0
September 15th, 2011 18:00
I think it may be best to open a case with EMC Support. We can engage Emulex support if necessary.
DanPJ
2 Intern
•
309 Posts
0
September 16th, 2011 07:00
I already talked to Emulex support, they don't have a solution. They said to have Microsoft analyze the memory dump. So I guess I will put this on hold until I hear back from Microsoft.
Thanks.