cfgadm

on solaris host

Can you post the output from
cfgadm -al

Thanks

Ap_Id Type Receptacle Occupant Condition
IO0 HPCI+ connected configured ok
IO0::pci0 io connected configured ok
IO0::pci1 io connected configured ok
IO0::pci2 io connected configured ok
IO0::pci3 io connected configured ok
IO1 HPCI+ connected configured ok
IO1::pci0 io connected configured ok
IO1::pci1 io connected configured ok
IO1::pci2 io connected configured ok
IO1::pci3 io connected configured ok
SB0 V3CPU connected configured ok
SB0::cpu0 cpu connected configured ok
SB0::cpu1 cpu connected configured ok
SB0::cpu2 cpu connected configured ok
SB0::cpu3 cpu connected configured ok
SB0::memory memory connected configured ok
SB1 V3CPU connected configured ok
SB1::cpu0 cpu connected configured ok
SB1::cpu1 cpu connected configured ok
SB1::cpu2 cpu connected configured ok
SB1::cpu3 cpu connected configured ok
SB1::memory memory connected configured ok
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 disk connected configured unknown
c0::dsk/c0t1d0 disk connected configured unknown
c1 scsi-bus connected configured unknown
c12 fc-fabric connected configured unknown
c12::500507630308c23b disk connected configured unusable
c12::5006048452a5c208 disk connected configured unknown
c13 fc connected unconfigured unknown
c14 fc-fabric connected configured unknown
c14::50050763030bc23b disk connected configured unusable
c14::5006048452a5c207 disk connected configured unknown
c15 fc connected unconfigured unknown
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t1d0 disk connected configured unknown
c6 scsi-bus connected unconfigured unknown
c7 scsi-bus connected unconfigured unknown
pci_pci0:e00b1slot1 unknown connected unconfigured unknown
pci_pci2:e01b1slot1 unknown connected unconfigured unknown
pcisch1:e00b1slot0 pci-pci/hp connected configured ok
pcisch2:e00b1slot3 mult/hp connected configured ok
pcisch3:e00b1slot2 unknown connected unconfigured unknown
pcisch5:e01b1slot0 pci-pci/hp connected configured ok
pcisch6:e01b1slot3 mult/hp connected configured ok
pcisch7:e01b1slot2 unknown connected unconfigured unknown

also getting lots of the following error . as per /var/adm/messages

Jun 11 14:30:21 Corrupt label; wrong magic number
Jun 11 14:30:21 [ID 107833 kern.warning] WARNING: /pci@3d,700000/SUNW,qlc@1/fp@0,0/ssd@w5006048452a5c207,f4 (ssd454):
Jun 11 14:30:21 Corrupt label; wrong magic number
Jun 11 14:30:21 [ID 107833 kern.warning] WARNING: /pci@1d,700000/SUNW,qlc@1/fp@0,0/ssd@w5006048452a5c208,f4 (ssd451):
Jun 11 14:30:21 Corrupt label; wrong magic number
Jun 11 14:30:21 [ID 107833 kern.warning] WARNING: /pci@3d,700000/SUNW,qlc@1/fp@0,0/ssd@w5006048452a5c207,f4 (ssd454):

Let me guess .... you have a VCM or a GK mapped ad lun 244

i meant as we do in navisphere for NAVICLI

Hi Sfefano,

The issue is sorted ..

And, it is noticed that symcli has been installed at application host i am pretty sure it will be a security threat if unix admin tries some commands to learn storage stuff .. Can we restrict this unauthorised access at DMX as we do in Navisphere for naviagent ?

thanks

Guys, I have created the following devices with 2 paths ..Actually, unix admin using SVM to configure these LUNs to expand meta [unix] .. since they see 2 devices for each pseudo device, they are not sure how to configure them ..

But, they can use pseudo device from format to expand the existing file system , correct?

Pseudo name=emcpower223a
3072 pci@1d,700000/SUNW,qlc@1/fp@0,0 c12t5006048452A5C208d264s0 FA 9aA active alive 0 0
3074 pci@3d,700000/SUNW,qlc@1/fp@0,0 c14t5006048452A5C207d267s0 FA 8aA active alive 0 0

Pseudo name=emcpower224a
3072 pci@1d,700000/SUNW,qlc@1/fp@0,0 c12t5006048452A5C208d265s0 FA 9aA active alive 0 0
3074 pci@3d,700000/SUNW,qlc@1/fp@0,0 c14t5006048452A5C207d268s0 FA 8aA active alive 0 0

Pseudo name=emcpower225a
3072 pci@1d,700000/SUNW,qlc@1/fp@0,0 c12t5006048452A5C208d266s0 FA 9aA active alive 0 0
3074 pci@3d,700000/SUNW,qlc@1/fp@0,0 c14t5006048452A5C207d269s0 FA 8aA active alive 0 0

That is correct, the pseudo devices can be used in SVM to create large meta devices.

Conor

You have options .. you can use symACL and even host-based authorization ... You can find better details in symcli manuals ... .... Just look for "symacl" and "symauth"