Booting from SAN via Qlogic Cards and C200 Servers on VMAX

I am trying to get a c200 Cisco UCS blade server to boot from SAN via a Qlogic HBA

The zoning and masking shows as connected and a single path is all that has been configured, we have done all the steps in the configuration guide and it see the disk but when we try to load any type of operating system it fails to find a disk

We have even removed the mezzanie card from the C200 to try and get this to work, has anybody seen a similiar issue whereby the server sees the disk in the hba settings and setup but will not let them load a operating system and does not see the disk when we try to load an operating system to the configured disk

http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1448

http://networkadminkb.com/KB/a26/how-to-boot-from-san.aspx

http://www.manualslib.com/manual/403437/Hewlett-Packard-Integrity-Bl890c-I2-Server.html?page=22