Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

KD8EWE

2 Intern

 • 

155 Posts

1541

November 10th, 2011 19:00

Bit name to flip between HP Unix and Linux

Please help me on identifying  the name of  bit to flip on frame fiber adapter between HP Unix and Linux

dynamox

9 Legend

 • 

20.4K Posts

November 10th, 2011 20:00

you mean FA flags ? Are you trying to share FAs between HPUX and Linux ?

KD8EWE

2 Intern

 • 

155 Posts

November 11th, 2011 05:00

Thanks for the reply, I would say migration from HP Unix to Linux.

dynamox

9 Legend

 • 

20.4K Posts

November 11th, 2011 21:00

these are the flags that are needed for Linux (RedHat)

1                  Red Hat RHEL [x86_64] 5.51                  FC-AL2; FC-SW                  (C) Common Serial Number; (D) Disable Queue Reset on Unit Attention; (EAN) Enable Auto Negotiation; (PP) Enable Point-to-point; (SC3) SCSI-3 compliance; (SPC-2) SPC-2 compliance; (UWN) Unique World Wide Name                  (ACLX) Initiator Group; (OS2007) Host SCSI Compliance 2007                  EMC Enginuity 5874: .121.102, .122.103, .123.104, .157.129, .207.166, .210.168, .229.182, .230.183, .240.191, .241.191, .242.191, .248.194, .259.201                  EMC Symmetrix VMAX       
2                  Red Hat RHEL [x86_64] 5.51                  FC-AL2; FC-SW                  (C) Common Serial Number3; (D) Disable Queue Reset on Unit Attention; (EAN) Enable Auto Negotiation; (PP) Enable Point-to-point; (SC3) SCSI-3 compliance; (SPC-2) SPC-2 compliance; (UWN) Unique World Wide Name                  (ACLX) Initiator Group; (OS2007) Host SCSI Compliance 2007                  EMC Enginuity 5875: .135.91, .139.93, .198.148, .231.172                  EMC Symmetrix VM

HurseB

11 Posts

November 17th, 2011 13:00

What release of Linux are you going to be useing and what array? 

RHEL 5 and 6:

DMX: C D SC3 SPC2 PP EAN UWN VCM

VMAX: C D SC3 SPC2 PP EAN UWN ACLX

As for the Optional bit OS2007 I would recomend NOT setting it unless specified as requierd by the ESM. It will cause the array to return sense data on normal changes, this has been known to cause the linux scsi driver to treat as an fatal error when its just infomational.

Note many of theses bits are an offline change exspecaly the sc3 and spc2 bits. So I would recomend shutting the linux hosts down and setting useing  hba_flags the steps will be outlined in the SE array controles guide on powerlink.  If you need any more detailed information or assistance with setting the bits are useing SE to use hba_flags please open a support ticket with the SSG Unix support group.

Was this post helpful?

View All

No Events found!

Top