Unsolved
This post is more than 5 years old
7 Posts
0
811
May 30th, 2016 05:00
Rebuild RAID5 index - MD1000
Hello,
Following a bad manipulation on a MD1000 with a PERC 5 card, I put out 2 HD from their place.
There are now in off line state in the OpenManage Server.
How can I put them back on line into the original virtual disk, knowing that there is no hardware failure ?
Thx
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
June 2nd, 2016 14:00
Hello Jack,
What you are going to want to do is to insert the drives and then go into the PERC5 Bios & you should be able to add the drives back into the configuration. Once that is done then it should bring the virtual disk back online.
Please let us know if you have any other questions.