This post is more than 5 years old
3 Posts
0
20553
January 26th, 2015 13:00
Promote replica from CSV environment to non-CSV environment.
We have an EqualLogic PS 6100 with a CSV volume that we're replicating to a PS 4100 in a remote datacenter. We have a 3 node cluster using Hyper-V in the local site, and 1 node that isn't clustered at the remote site. If we promote the replica at the remote site (for testing DR) can we connect to the volume and spin up the VM's or do we have to setup a cluster in the remote site before we can use the volume? I've searched on the web but haven't seen this scenario documented.
Thanks,
Larry
No Events found!
ldossjr
3 Posts
0
February 2nd, 2015 15:00
Thanks for your reply. We have all servers on the primary side in the clsuter already. May try to add the remote and then do some testing.
Thanks!
ldossjr
3 Posts
0
February 17th, 2015 08:00
Thanks Don!
We will test without adding the remote side to the cluster and reply back to this post with the results.
Larry