Unsolved
This post is more than 5 years old
1 Rookie
•
88 Posts
0
33572
October 31st, 2013 07:00
Odd FW Upgrade Error
Anyone ever see this before? What does this mean???
Array firmware update from version V6.0.6 to V6.0.7 failed. Reason: The array cannot be restarted using the GUI because of a RAID issue. Use the CLI 'restart' command to continue.
PS6510
No Events found!
mirko.schnellba
25 Posts
0
October 31st, 2013 11:00
I have gotten this upgrading PS4000s from 6.0.4 to 6.0.7. There was nothing wrong with my RAID sets, and restarting the arrays via CLI let the upgrade complete.
The support engineer I contacted let me know that this was a purely cosmetical issue, which would be fixed in firmware 7.
Christian Hanse
1 Rookie
•
62 Posts
0
November 4th, 2013 03:00
I had the same error on an array running 6.0.1 when doing the update to 6.0.7 from gui.
No rebuilds were in progress.
Engineering came back, and told me that the error message was errornous in itself, and i should not have any issues.
I have updated to 7.0 EPA without issues on the same array (doing it from the CLI just to be safe.)