Unsolved
This post is more than 5 years old
2 Intern
•
140 Posts
0
6705
November 3rd, 2016 13:00
Need to change the MGT Port IP on a MD3200
We just moved our MD3200 from an old vSphere virtual environment to a new vSphere 6.0 environment. The mgt ports IPs are set to 192.168.0.6 and 192.168.0.7.
The first mgt port is connected to port 5 on our NEXUS Switch.
I have a VM that has the MDSM software running and is connected to a vNic on our virtual management VLAN at ip 192.168.10.10.
I need to change the mgt ports IPs from 192.168.0.6 / 192.168.0.7 to 192.168.10.111 and 192.168.10.112.
What is the best way to go about doing this?
thanks
No Events found!
SJNAPL
2 Intern
•
140 Posts
0
November 4th, 2016 12:00
I found a way around the problem by connecting the mgt port to a our cisco switch in a VLAN and then, connecting an ESXi Server nic to the same VLAN. I created a new vSwitch and added that nic to the vSwitch,.
I had a VM with MDSM on it and added a the new network to teh VM and set the IP to an IP in the same subnet.,
I can connect and now need to remove the old iSCSI connections and the old hosts , then add the new ones.
I ned to find the steps to remove the old info from MDSM.
DELL-Sam L
Moderator
•
7.6K Posts
0
November 11th, 2016 08:00
Hello SJNAPL,
Here is the link to the administrator guide for MDSM. If you look on page 52 it explains on how to remove old iSCSI connections. http://downloads.dell.com/manuals/common/md32xx_md36xx_administrator%20guide_en%20us.pdf
Also if you look on page 57 it explains on how to remove host access as well.
Please let us know if you have any other questions.