Need MIBs for PowerVault NX3610

Zanz76,

You can find them in the FTP where you pull the diags, under the MIB folder. They should be the same versions as the gui provides though, would you be able to confirm?

Thanks.

Here is an example of what is being returned, should there not be more translation going on with the mibs I have?

[cmk.mkeventd.EventServer.snmp] 1.3.6.1.2.1.1.3.0 = 8623101
[cmk.mkeventd.EventServer.snmp] 1.3.6.1.6.3.1.1.4.1.0 = 1.3.6.1.4.1.232.0.22018
[cmk.mkeventd.EventServer.snmp] 1.3.6.1.6.3.18.1.3.0 =
[cmk.mkeventd.EventServer.snmp] 1.3.6.1.6.3.18.1.4.0 = public
[cmk.mkeventd.EventServer.snmp] 1.3.6.1.6.3.1.1.4.3.0 = 1.3.6.1.4.1.232
[cmk.mkeventd.EventServer.snmp] 1.3.6.1.2.1.1.5.0 =
[cmk.mkeventd.EventServer.snmp] 1.3.6.1.4.1.232.11.2.11.1 = 0
[cmk.mkeventd.EventServer.snmp] 1.3.6.1.4.1.232.22.2.2.1.1.2.1 =
[cmk.mkeventd.EventServer.snmp] 1.3.6.1.4.1.232.22.2.2.1.1.3.1 =
[cmk.mkeventd.EventServer.snmp] 1.3.6.1.4.1.232.22.2.3.3.1.1.3.1 =
[cmk.mkeventd.EventServer.snmp] 1.3.6.1.4.1.232.22.2.3.1.1.1.7.1 =
[cmk.mkeventd.EventServer.snmp] 1.3.6.1.4.1.232.22.2.3.1.1.1.15.1 = 5

Of course the info with <> is rewritten for privacy, but most of this is unuseable. Sorry I am a bit new to using traps, but was expecting a more readable output.

Thanks,

I am in a new environment and many network routes are limited. I managed to get Fluid Manager gui loaded up and noticed the 2 mib download links, I assumed these were all that were needed to have all traps translated. I will try to see if FTP is something I can get to, can you list all mibs required?

Thanks,