Unsolved
This post is more than 5 years old
1 Message
0
76600
December 9th, 2015 10:00
MD3600i iSCSI Ports Listed as 0
I have a PowerVault MD3600i that was working fine but now when i tried to create a new virtual volume i get an error "Error 1010 - A Management connection ot the RAID controller module in slot 0 must be defined to complete this operation."
I checked slot 0 and all the ports are active and I can ping ip addresses. When i go into the physical layout and click on slot 0 it says that there are 0 iSCSI ports however if i configure the iSCSI ports i have 2 setup on each controller.
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
December 14th, 2015 06:00
Hello difi80211g,
Can I get you to pull a support bundle so that we can look at it to see why the controller in slot 0 is stating that there are no iSCSI connections? I will also send you a private message that you can email the file.
Please let us know if you have any other questions.