Unsolved
This post is more than 5 years old
40 Posts
0
24062
February 5th, 2013 00:00
MD3000i event list
Dears,
Please Could One Provides a list of all the Events (SNMP) Generated by the MD3000i SAN, because i want to integrate it with the RSA envision SIEM and i need a list of all events in order to parse them.
It is so important, Please Help Me.
No Events found!
DELL-Kenny K
685 Posts
0
February 5th, 2013 09:00
Areeb1988,
I did some digging and we do not have a list of all the different events that will cause an SNMP trap. However what you can do is install the latest MDSM which has the MIB file installed with it. Then you can set up all the SNMP traps without using any kind of 3rd party software.
support.dell.com/.../CLIMR2g.pdf
The SNMP section starts on the bottom of page 56. It is recommended to have the firmware and MDSM up to the latest version. If you have any questions please feel free to let me know and I would be happy to assist.
areeb1988
40 Posts
0
February 7th, 2013 03:00
Dear,
What i mean that i want a list of the Events ID and its Message Body i order to learn the RSA These Events
DELL-Kenny K
685 Posts
0
February 7th, 2013 14:00
Unfortunately we do not have an actual list of all the possible event IDs and the message body that are possible to get on this array. That is why we recommend setting up the SNMP traps to catch all those errors as they come.
areeb1988
40 Posts
0
February 10th, 2013 00:00
Dear,
Is there is any simulator that could simulate the snmp Traps, send traps and i will receive them to get the id and the description.
DELL-Kenny K
685 Posts
0
February 14th, 2013 18:00
The only SNMP info that we have for this array is included in the document listed above.
areeb1988
40 Posts
0
February 18th, 2013 03:00
Dear,
I found some traps description for Dell products (RAC, BMC), the link shown below, is there is any thing like that related to MD3000i SAN.
<ADMIN NOTE: Broken link has been removed from this post by Dell>
Regards
areeb1988
40 Posts
0
February 19th, 2013 04:00
Dear,
the MD3000i SAN Sends just Critical Events, is there any configuration to send any event to snmp?
Regards
DELL-Kenny K
685 Posts
0
February 19th, 2013 10:00
Areeb1988,
When you are configuring the SNMP alerts you should have options to send critical, warning, and even informational events.
areeb1988
40 Posts
0
February 19th, 2013 21:00
Dear,
In The MD3000i SNMP Window Configuration there is no any option to select alerting level
DELL-Kenny K
685 Posts
0
February 20th, 2013 11:00
Sorry for the conclusion, I looked at a simulator and for the MD3000i it looks like you setup the community name, the trap destination, and the SNMP addresses and then it just sends everything. It looks like it is an all or nothing setup. When I said there were options on what to send that is on the EQL arrays. I apologize for that.