Unsolved
This post is more than 5 years old
1 Message
0
105527
December 16th, 2015 02:00
MD3000i errors
I'm not incredibly familiar with the device, it was installed long before I started at this company and it's been pretty solid, so I need some help troubleshooting it. It's currently reporting two errors in MDSM:
Storage array: MD3000-ISCSI
Component reporting problem: Host Board Left
Status: Not available
RAID Controller Module: Slot 1
Service action (removal) allowed: No
Service action LED on component: No
Storage array: MD3000-ISCSI
Component reporting problem: Thermal sensor
Status: Not available
Location: Expansion enclosure 0
Component requiring service: Temperature sensor
What should I try?
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
December 17th, 2015 14:00
Hello Simper,
So based on the errors that you posted it looks to be an issue with the thermal sensor. Now for the MD3000i that sensor is located with the power supply. So to fix this error what we would normally do is to replace the left power supply.
Please let us know if you have any other questions.