Unsolved
This post is more than 5 years old
47 Posts
0
4429
May 16th, 2012 05:00
MD 1000
Where is the RAID config stored? On the disks or the controller? We have a project where it would be great if we could move a MD1000 to a new server with an equal controller as in the old server. Is this possible?
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
May 16th, 2012 09:00
Hello hypervfan,
The RAID configuration is stored on the controller in the MD1000. Since you are going to be moving the MD1000 it is best to move the old controller as well. As you stated that you have a newer controller that is equal to the old which should be good & have no issues but sometimes if the controllers are different then you will run into some issues.
Please let us know if you have any other questions or issues.