Unsolved
This post is more than 5 years old
2 Posts
0
13088
August 5th, 2013 01:00
Latest FW package for MD3600f
Hi All!
What is the latest FirmWare package for MD3600f?
I am currently running 07.84.44.60, but this package is not available on download centre anymore - there is package 07.80.62.60 instead.
I am wondering if 07.84.44.60 is "official" and supported, cause one of my MD3600f arrays controller module started to reset itself once in three or four months after upgrading to 07.84.44.60
No Events found!
DELL-Kenny K
685 Posts
0
August 6th, 2013 10:00
The latest Firmware revision for the Controller modules in the MD3600F is 07.84.47.60. Below is the link that will take you to the download page for the Controller firmware and it also includes the NVSRAM firmware as well.
http://www.dell.com/support/drivers/us/en/04/DriverDetails/Product/powervault-md3600f?driverId=3TTC6&osCode=WS8R2&fileId=3209563409&languageCode=EN&categoryId=SG
Please let me know if you have any other questions or concerns.
indulis
2 Posts
0
August 7th, 2013 02:00
10x a lot. I will install this FW this weekend along with SSD cache and High Perf Tier.
Just one more question about cache size - I noticed, that newer FW revisions supports 4GB DIMMs.
Currently I have 2 gigs installed on my controllers.
How can I upgrade to 4 gig?
Is there an upgrade package available? Should I buy modules from DELL? Or may be I can install apropriate 3rd party memory modules.
WBR,
indulis
DELL-Kenny K
685 Posts
0
August 7th, 2013 10:00
When it comes to doing upgrades on the system I would recommend using Dell. If you reach out to your sales rep they will be able to provide you with all of the upgrades options that you have for your unit and all of the different pricing options that are available to you. This way when you buy from Dell you know it will be covered and supported under warranty.