Unsolved
This post is more than 5 years old
1 Rookie
•
23 Posts
0
15814
November 5th, 2013 02:00
ISCSI Virtual Ipaddress requirement for Compellent Dual Controller Environment
Hi Team,
we are designing Ipaddress schema for for Dual controller Compellent sc8000 .Each controller will have 3 Dual port 10GB card .
total 12 ports of 10GB in Dual contoller.
Please let me know do we need to assign Ipaddress to each iscsi port and than define control ipaddress for redirction or do we need to count in different way. just have small doubts on no. of IP address required for planning.
Thanks
No Events found!
Khalid EA
1 Message
0
November 5th, 2013 03:00
Hi Ravinder,
you need indeed to setup a Ipaddress to each iscsi port.
depending on different subnets (fault domains) you need a control ipaddress also.
So in case you have 2 subnets you going yo create 2 Fault Domains.
1 Fault domain with 6 iscsi ports = 7 ipaddress in subnet xxx
and 1 Fault domain with 6 iscsi ports = 7 ipaddress in subnet yyy
hope this clears things up for you.
KhalidE