Unsolved
This post is more than 5 years old
3 Posts
0
7035
October 21st, 2014 08:00
Install TL 2000
Hi, I install TL 2000 is connected through a SAS cable drivers to install in the device manager shows the device, but in the ISCSI can not add a device. Where and what am I doing wrong? Thank you.
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
October 23rd, 2014 06:00
Hello Smiley-rov,
In order to use iSCSI with your TL2000 you need to have purchased the iSCSI bridge. If you have purchased the bridge then here is the link to the guide on how to install it & configure your iSCSI. ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-tl2000_Reference%20Guide2_en-us.pdf
Please let us know if you have any other questions.
Smiley-rov
3 Posts
0
October 23rd, 2014 06:00
Thanks for reading, tell me further necessary third-party application to write to the tape drive?
DELL-Sam L
Moderator
•
7.6K Posts
0
October 23rd, 2014 15:00
Hello Smiley-rov,
With the TL2000 it doesn’t come with any backup software so you will need to decide on which backup software that you want to use with the TL2000.
Please let us know if you have any other questions.
Smiley-rov
3 Posts
0
October 24th, 2014 00:00
need to make a backup folder from the server win 2008R2, that recommend?
DELL-Sam L
Moderator
•
7.6K Posts
0
October 27th, 2014 06:00
Hello Smiley-rov,
Depending on your backup software that you will be using with the TL2000 you should be able to do backup your server. Most backup software will put the backups into their own folders but once again that depends on the software.
Please let us know if you have any other questions.