Unsolved
This post is more than 5 years old
6 Posts
0
39715
November 8th, 2012 03:00
How do i change the in-band management IP on MD3000i
Hi
We have a MD3000i in place and working, the out-band management IP's are setup and working.
However in a recent subnet change we overlooked the need to change the in-band IP address.
We now need to change this IP.
I have logged into the Modular Disk Storage Manager but cannot see where to change it.
Could someone point me in the direction of where i can change this IP address?
Thanks
Hod2011
No Events found!
DELL-Kenny K
685 Posts
1
November 8th, 2012 10:00
On these iSCSI arrays it is recommended that you use the out-of-band for the management needs. The in-band IP addresses are just the iSCSI IP's. When you did the subnet change did you already change the iSCSI ports on the controller modules?
hod2011
6 Posts
0
November 9th, 2012 02:00
The ISCSI ports on the controller modules have already been changed, we just overlooked the in-band ip address.
Everything appears to be working fine on the SAN it's just annoying me when i look in the storage manager and see the incorrect IP for the in-band management connection.
DELL-Kenny K
685 Posts
0
November 15th, 2012 18:00
Being that you stated that you use the Out-of-Band and they are configured and working then you do not need the in-Band because you cant use both of them and the out of band management is what we recommend to use.