Unsolved
This post is more than 5 years old
5 Posts
0
636
August 20th, 2014 08:00
Errors in the GUI
I updated a 6000 running 7.0.4 to the latest 8.0 firmware (R396836) and the FS7600 to 3.0.930717 (from 3.0.920760 or 3.0.930714). The upgrades went as expected, but I am getting a couple of messages, and just wanted to verify that they were normal. After several days, I am still getting a warning that the NAS controllers are not up-to-date, and the Quota tab says that I have to wait for a newer version to support quotas.
Also, the "root" password on the NAS is still pretty obvious. I was hoping for a fix on that.
No Events found!
david_stevens
4 Posts
0
August 20th, 2014 08:00
Can you post the messages you are unclear about and possible a screenshot or two showing the errors?
Thanks,
Dave
bmcbh
5 Posts
0
August 20th, 2014 09:00
david_stevens
4 Posts
0
August 20th, 2014 09:00
Ben,
You are most likely receiving the error about the FS firmware being wrong because you are using a version of the EQL firmware that is slightly newer that what was originally released for the FS beta program.
The correct version of EQL firmware should be R393928.
Dave
bmcbh
5 Posts
0
August 20th, 2014 09:00
Ok, but I used the versions that are posted together on the Beta Update site, so this may be a common error.
- Ben
Brian_Spisak
1 Rookie
•
2 Posts
0
August 20th, 2014 12:00
I updated the forum link on Tuesday to point to the latest version of the EQL firmware, which is now "R396836". Link below also.
https://eqlsupport.dell.com/support/download.aspx?id=6442455998
bmcbh
5 Posts
0
August 20th, 2014 15:00
Thanks. That is the version I am using (from that site). I really appreciate that for this release a new site has been added for the updated Beta version. In the past, I've always had to ping people to get the lastest info.
-Ben Howard