Unsolved
This post is more than 5 years old
5 Posts
0
67128
November 12th, 2013 09:00
Dell Compellent SC8000 Controllers connectivity
While connecting two SC8000 with a single cable through a single port on each controller (Eth 0, 10G) do refer to a single point of failure
In case of any breakage of cable or any fault in port may result in the loss of communication between the controllers
Thanks
Zeeshan
No Events found!
BVienneau
115 Posts
0
November 12th, 2013 09:00
The direct SC8000 to SC8000 cable is just one of many hearbeat connection points between the two controllers. It is used for the initial joining of the two controllers but is not one of the high priority methods of communication between the controllers. You still have FC (if used) and also the SAS backend as other options for IPC communications between the two controllers. If the heartbeat cable is lost it will not cause a complete isolation of the two controllers from one another.
Zeeshan123
5 Posts
0
November 12th, 2013 20:00
Thanks a lot for the response, but what could be the advantage of having this heartbeat connection and disadvantage for not having this connection
Kind Regards
Zeeshan