Unsolved
This post is more than 5 years old
10 Posts
0
15332
November 27th, 2014 00:00
Bad Replication settings
Hello.
I try to replicate volumes between 2 Equallogic group (1 group with 3 members : 2 PS600 / 1 PS6100 and 1 group with 1 member PS4100). Firmware are 6.0.6 on every members.
When I launch "configure replication" on a volume, the "current replica volume reserve" is only 10% of the real volume size. Therefore, setting "Total replica reserve" to 200% makes only 20% of the real volume size.
Do I miss something or is it a bug ?
--------------------------------------------------
It seems to be the normal way ... But why to allocate 10%, event for the first replication ? The entire volume needs to be replicated, so it seems to me that "current replica volume reserve" should be at least 100% of the original volume, isn't it ?
JonathanSE
10 Posts
0
December 1st, 2014 00:00
Hi Don, thanks for your answer.
If you look at my screeenshot, you could see that event with the same % (105%) on both Local reserve and Total replica Reserve, I have not the same size (177Go vs 1.7To). My original volume is 1.65To