Unsolved
4 Posts
0
520
November 14th, 2022 13:00
VSA 6.0 Unable to create new datastore
After upgrading from 5.0.1 to 6.0 I am no longer able to create new datastores. The new UI seems to assume that everyone has configured replication, but that isn't the case. When I reach the step to select a replication partner, I am not able continue because I don't have replication enabled and the next button is grayed out.
No Events found!
REKnight
4 Posts
0
November 14th, 2022 13:00
I didn't realize the Flash client was still enabled, but once I tried using that I was able to create the datastore without issue.
I will also note that the HTML 5 client doesn't seems to include Host Clusters in the Hardware Resources page for some reason.
REKnight
4 Posts
0
November 14th, 2022 21:00
"how did you upgrade the VSA to 6.0?"
I followed the instructions in the user guide to upgrade.
"Also have you tried reboot thing the client afterwards?"
I assume by "reboot thing" you mean the appliance, yes, I did try rebooting the appliance.
"Or even try installing?"
I don't understand what you are trying to say here.
"This is the manual and I don't particular see the issue you are experiencing."
I included a screen shot of the issue. I don't know what you think this last statement accomplishes.
DellEMCSupport
Moderator
•
631 Posts
0
November 14th, 2022 21:00
Hello, how did you upgrade the VSA to 6.0? Also have you tried reboot thing the client afterwards?
Or even try installing?
https://dell.to/3X3xYVX
This is the manual and I don't particular see the issue you are experiencing.
DellEMCSupport
Moderator
•
631 Posts
0
November 15th, 2022 01:00
Hi @REKnight,
I assumed VSA, you're referring to EQL Virtual Storage Manager?
What is your ESXi version?
Are you creating a VMFS datastore? Is it the same if you select VVol?
What is your EQL product model?
REKnight
4 Posts
0
November 21st, 2022 07:00
Yes, I am referring to the EqualLogic Virtual Storage Manager.
ESXi 6.7U3
Yes, I am creating a VMFS datastore. I have no need to create a VVol, so I haven't tried.
PS-M4110
dwilliam62
3 Apprentice
•
1.5K Posts
0
November 21st, 2022 13:00
Hello,
I am glad you were able to discover that the FLASH GUI is still enabled. They are two separate plugins.
Would you be willing to open a support case? They will need logs from the EQL array, VSM and vCenter and the ESXI nodes. What firmware is on the PSM4110? Hopefully 10.0.3?
Regards,
Don