Unsolved
This post is more than 5 years old
3 Posts
0
3093
July 15th, 2017 16:00
Volume full and won't come online after expanding
I had two volumes on our ps6510 fill up yesterday and they went offline as full and unable to expand. For some reason the management web UI isn't accessible so I expanded the drives manually through the console but they won't come online again, the command processes and nothing happens. Does anyone have any insight as to why this might be?
No Events found!
gsillence
3 Posts
0
July 17th, 2017 06:00
Hi Don,
Apologies for the delay, thank you for responding. The unit is running firmware V5.2.1 (R2 19658). There is no replication running at the moment and no snapshots. The volumes are showing -nospace-auto-grow and when I try to run the online command for the volumes it processes and says volume was set online by administrator but show volume afterwards still shows it as offline. There is extra space on the unit, are there certain commands to re-thin volumes via command line? Any help is appreciated.
Thanks,
Greg
gsillence
3 Posts
0
July 17th, 2017 07:00
Hi Don,
I've attached the output for show member and show volume commands.
Greg