Unsolved
This post is more than 5 years old
5 Posts
0
1725
May 11th, 2017 15:00
view capacity balancing status?
I just added a new PS4210 array to an existing pool that had one PS4100 in it.. It was my understanding that existing volumes in the group would be spread across the new array. I'm guessing this is a somewhat slow process. Is there a way to see the progress of this process?
No Events found!
razor192
5 Posts
0
May 12th, 2017 13:00
each array is on a PowerConnect 6224 with 10Gig interconnect.
razor192
5 Posts
0
May 12th, 2017 13:00
Is it normal for this process to be brutally slow? Looks like it moved about 0.2 TB over night.. this array group is very lightly used..
razor192
5 Posts
0
May 12th, 2017 13:00
I'm using the 2x 10G BaseT copper ports on the 2410, they say they are connected at 1Gbps both EQL boxes are running 9.1.1
The only thing I'm not doing on the switch side is running a LAG between the switches with two 10Gig links in it.. I just have a single 10Gig up-link between switches. Given the load I didn't see the need for 20Gig between them.