This post is more than 5 years old
5 Posts
0
2727
December 13th, 2017 10:00
Remove Default Storage Pool of Ex-Member
Hi everyone,
This is my first time posting here and I hope someone can help me clarify the following, I have a group composed of two old PS6100 and recently I added a PS6210 as it was going to be part of the same group however I had to remove it to make some test with the Storage in an isolated environment.
The "problem" I see now is that in my original Group I was left with a (default) Storage Pool that belonged to the PS6210 I removed, I have searched for a way to delete it or make one of the other two Pools I have the default but haven't had any luck so far, technically speaking I dont have any issues with assigning LUNs or other tasks but I would like to leave the Group "clean" of unnecessary information, from what I have investigated it seems this is not possible but would like to get an answer here.
Regards!
servicedesk.latam
5 Posts
0
December 14th, 2017 06:00
Hi Donald,
Thanks for your answer, that´s what I have been reading but isn't there a way to move the (default) tag so to speak to another pool? In my case the Default Storage Pool belongs to the last PS6210 I added and then removed from my Group, the member was deleted correctly but the Pool is still there.
If this is the expected behavior then I don't have any issues, I just don't want to have a problem if later I add back the PS6210 with the same name.
Regards!
servicedesk.latam
5 Posts
0
December 14th, 2017 08:00
Thanks again for your fast response Donald, I will check with CLI the output of the command and will add the 6210 later to a temp pool.
Regards!