Unsolved
This post is more than 5 years old
1 Rookie
•
34 Posts
0
1006
June 5th, 2018 10:00
ps6210 keep flashing yellow light after replace bad hd.
we had 2 bad drive this morning and replace it with same part number and capacity, but PS6210 enclosure still blink yellow light, on group manager don't see any bad drive and it still has yellow triangle on member. we are running firmware version 9.0.5 on both controller.
No Events found!
dwilliam62
4 Operator
•
1.5K Posts
0
June 6th, 2018 07:00
Hello,
Unless you got the drive from Dell specifically for the EQL array a standard off-the-shelf drive, even if the same part number will NOT work in a PS6210. The drives are customized by the vendor specifically for the EQL arrays. There's no way to make an OEM drive work in EQL SAN.
Regards,
Don