Unsolved
This post is more than 5 years old
1 Rookie
•
6 Posts
0
1490
June 22nd, 2018 04:00
PS6100 microSD card rebuild
I have a one controller san that had the microSD card removed and now lost.
It boots to the CTRL-P boot mode with an error about the mossing microSD card. I have a new card, formatted to NTFS (saw something on line about this) and it still boots the same.
How can I get what ever files are needed back onto the mocroSD card? And what files are needed?
I don't have another controller to borrow the micoSD card for a copy, or be sure it was the same firmare version.
No Events found!
mbmmbmbn
3 Posts
0
June 22nd, 2018 13:00
I'm in the same case.
dwilliam62
4 Operator
•
1.5K Posts
0
June 25th, 2018 05:00
Hello,
It doesn't use NTFS that's one problem. It's FAT16.
You need to clone the one from the active CM. Which means you need to take a small outage. You can copy it to an ISO file using a number of utilities out there. Even 'dd' on *NIX system will work. Then re-install and then go from file to the new microSD card.
Regards,
Don