Unsolved
This post is more than 5 years old
1 Rookie
•
2 Posts
0
2778
February 5th, 2019 13:00
Need ESX 6.7 iscsi to Equallogic setup guide
Does anyone know if a guide to configure ESX 6.7 connecting to a Equallogic? There was an old guide for ESX 6.0 but I am looking for 6.7 info. Thanks!
No Events found!
dwilliam62
4 Operator
•
1.5K Posts
0
February 5th, 2019 13:00
Hello,
I don't believe the install guide has been updated for 6.7 yet. Currently, the Dell PS Series is compatible with v6.7, however, the add-ins, VSM and MEM are not. So if you want those features like VVOLs you can't use v6.7 with EQL. The updates are coming but not yet available.
The iSCSI setup hasn't changed since 5.x. Only the GUI. If you use the Flash GUI you can use the ESX v6.0 instructions.
This is actually the more important document. How to set best practices. This has been updated to include v6.5.
https://downloads.dell.com/solutions/storage-solution-resources/BestPracticesWithPSseries-VMware(TR1091).pdf
Regards,
Don
amuguersia
1 Rookie
•
1 Message
0
March 13th, 2025 15:09
Hi dwilliam62, the document is not available, perhaps do you happen to share it from other source?
DELL-Young E
Moderator
•
5.2K Posts
0
March 17th, 2025 01:54
Hello, usually when things are old and irrelevant it can be taken off the website. VMware isn't supported any longer either. If you insist, you could probably raise an official ticket, state the reason why, and the tech support might be able to help. https://www.dell.com/support/incidents-online/en-us/contactus/dynamic
Respectfully,