Unsolved
This post is more than 5 years old
22 Posts
0
6695
June 8th, 2017 08:00
MEM and ESX 6.0
Hello all,
I have 4 x PS6110XV arrays that need the controller firmware upgraded. These arrays are used with 2 ESX hosts running ESX 6.0. I am wanting to confirm the version of MEM that is installed in ESX 6.0. Is there a way to query ESX to display the version of MEM that is installed?
Thanks,
Eric. :)
No Events found!



ewhb
22 Posts
0
June 8th, 2017 08:00
Hi Joerg,
Thanks very much. This is what I have been finding in "googling" this topic.
From your example, if you run the command on your ESX 6.0 hosts, the output would reflect that you
have MEM 1.4 installed. You would see something like the following?
Origin3k
4 Operator
•
2.3K Posts
1
June 8th, 2017 08:00
Correct.
On a 6.0 Hosts it looks currenlty
Its a
Regards
Joerg
Origin3k
4 Operator
•
2.3K Posts
0
June 8th, 2017 08:00
Yes it is.