Unsolved
This post is more than 5 years old
1 Rookie
•
20 Posts
0
1112
September 22nd, 2016 09:00
Juniper ex4200-48t switches with EqualLogic
Hi we have been currently running these switches for almost 3 years but one of them went offline and we have had to buy a replacement.
They have been performing well up to now, but one of them has now developed a fault and we have had to order a replacement.
The firmware on them is out of date and I would like to know what version of junos dell recommends for these switches.
Thanks
No Events found!
rswislocki
52 Posts
0
September 27th, 2016 07:00
Look at http://en.community.dell.com/dell-groups/dtcmedia/m/mediagallery/20438558 - page 86
The switches listed below have been previously tested for use with dell storage products, but they are no longer tested by Dell.... :
...
Dell PowerConnect J-Series EX4200
...
Last FW validated - 12.0R1.x
Previous version of above document (june 2016):
For PS series arrays, switches listed in this section are supported [...] for the switch firmware versions listed and PS Series operating system versions
PC J-Series EX4200 switch FW-10.2R1.x ------------ eql FW 5.0.2 (stacking, LAG)
PC J-Series EX4200 switch FW-12.0R1.x ------------ eql FW 6.0.x, 7.0.x, 8.0.x (stacking, LAG)