3 Posts
0
950
February 21st, 2020 02:00
How to know the active CM on the equallogic ps4110
I'm trying to check the active CM on the equallogic ps4110, I ask for help
No Events found!
3 Posts
0
950
February 21st, 2020 02:00
I'm trying to check the active CM on the equallogic ps4110, I ask for help
Top
dwilliam62
4 Operator
•
1.5K Posts
0
February 21st, 2020 04:00
Hello,
The active CM will have two green lights near the serial port connector, the passive one will be yellow.
If you use SSH it will only connect to the active controller.
If you use the serial port on the passive after login you will be at a CLI> prompt. The active controller will show the Group Name as the prompt after you login I.e. PS-Group>
Regards,
Don
dwilliam62
4 Operator
•
1.5K Posts
0
February 21st, 2020 04:00
Hello,
Also if you use the Java WebGUI, when you select the Member then "Controllers" Tab you will see a picture of the two controllers. It will show which is active.
At the GrpName> prompt you can also type GrpName>member select MEMBERNAME show controllers
So if the name of the member is PS4110 it would be GrpName>member wselect PS4110 show controllers
This will show if CM0 or CM1 is the active controller.
Regards,
Don