Unsolved
3 Posts
0
578
February 27th, 2020 22:00
Hello! I ask for help in this case.
I'm trying to configure the Equallogic PS4110, but give that information. I already connected the network cable to the eth0 socket, but it is not working
No Events found!
dwilliam62
4 Operator
•
1.5K Posts
0
February 28th, 2020 05:00
Hello,
Make sure you have a link light on the controller and on your switch when you attempt this. You also might have your network cable on the passive controller.
You can't connect to a GbE switch. It must be 10GbE with a PS4110. It does not sync down to 1xGbE speed.
Also do not use the 10GbE uplink ports on a GbE switch, it must be a proper 10GbE switch.
Regards,
Don