Unsolved
2 Posts
0
608
October 5th, 2020 05:00
EqualLogic Type 11 Controller - Error - out of space in kmem_map - How to fix?
Good Morning All,
I am having an issue with my 07V250 Type 11 Controller - recently noticed a Health Condition warning stipulating the below;
panic:malloc: out of space in kmem_map,
I am unsure what this means, however I have a feeling it is SD Card related, is there any way to fix this?
Any help would be gladly appreciated,
Thanks,
Nick
No Events found!
dwilliam62
4 Operator
•
1.5K Posts
0
October 5th, 2020 06:00
Hello,
No this does not relate to physical space on the SD card or array. That in internal memory. What EQL firmware are you currently running?
Regards,
Don
nick.hayhurst
2 Posts
0
October 5th, 2020 09:00
Hello Don,
Thank you for your response!
So the current ROM Version is 3.6.4, I hope this helps
Thank you in advance!
Nick
dwilliam62
4 Operator
•
1.5K Posts
0
October 5th, 2020 10:00
Hello,
That's the HW BIOS, not the EQL firmware. In the GUI under MEMBER->Controllers it shows the firmware.
Or at the CLI you can run: GrpName>show members
I suspect it's an older revision of firmware, and it's been running for a long time?
One thing you can try is, serial connect into the SECONDARY or passive controller. Do a restart. Then when is reconnects to the active controller, wait 30 seconds and restart the PRIMARY controller to failover.
Regards,
Don