This post is more than 5 years old
20 Posts
0
40596
June 4th, 2015 15:00
EQL / VSM / MEM / vSphere Upgrade Order
Hello,
I now see that EQL v8, MEM 1.3 and VSM 4.5 have been released as EPA so I can upgrade to vSphere 6!
Is there a recommended upgrade order for all of these components? I would imagine EQL v8 first, then the vSphere environment, then MEM, then VSM?
I believe I read MEM 1.2 wasn't compatible with vSphere 6? If thats the case, I would imagine I have to switch to RR before upgrading vSphere and then apply MEM 1.3?
Thanks in advance!
No Events found!
EvanRowlett
16 Posts
0
June 10th, 2015 15:00
I had success with:
Upgrade Array Firmware
Upgrade vCenter
Upgrading the MEM to 1.3 on ESXi 5.5
Upgrade VSM - confirm it works in web interface
Upgrade hosts to ESXi 6
BriFar
29 Posts
0
June 14th, 2015 09:00
Hi Evan,
Today I downloaded the MEM 1.3 package from the eqlsupport.dell.com website. The zip file contains two other zip files. One for ESXi 5.5 and one for ESXi 6.0. I think you may be using the incorrect MEM package and might need to re-install it. I am assuming that the ESXi5 version installed when you upgraded to MEM 1.3 unless you used the 6.0 version on 5.5 and it worked.
Regards
Brian
EvanRowlett
16 Posts
0
June 15th, 2015 06:00
BriFar,
I installed MEM 1.3 for ESXi 5.5 first, and post upgrade to ESXi 6, did not need to re-install the ESXi 6 version. I can confirm that the Dell MEM package is working properly.
JohnTsitsiklis
12 Posts
0
June 23rd, 2015 05:00
Hi,
it would make sense to me to upgrade first the VSM and then the vCenter.
Since only the 4.5 VSM supports vCenter 6.
Is not the order you suggested a bit "not supported"?