Almost. The IP address under Management box is the Group Well Known Management Address. So if you had more than one EQL array in a group, that will always been answered by array this is the Group Lead. This way you don't need to know which member is the Group Lead at the current time.
The bottom IP address is specific to that member array. If you needed to directly access that member for some reason, then the array member physical port IP address is what you use.
For things that are group wide, you should use the Group Well Known Management address.
Parweez
37 Posts
0
November 5th, 2018 10:00
These both IP's bring you to the same group management is that because one is the group management and the other is the array management?
Parweez
37 Posts
0
November 5th, 2018 11:00
Hi Don, Thanks for your reply.
dwilliam62
4 Operator
•
1.5K Posts
0
November 5th, 2018 11:00
Hello,
Almost. The IP address under Management box is the Group Well Known Management Address. So if you had more than one EQL array in a group, that will always been answered by array this is the Group Lead. This way you don't need to know which member is the Group Lead at the current time.
The bottom IP address is specific to that member array. If you needed to directly access that member for some reason, then the array member physical port IP address is what you use.
For things that are group wide, you should use the Group Well Known Management address.
Regards,
Don
dwilliam62
4 Operator
•
1.5K Posts
0
November 5th, 2018 13:00
Hello,
You are very welcome. Happy to help.
Regards,
Don