Unsolved
This post is more than 5 years old
1 Message
0
1439
November 7th, 2018 04:00
Control module SES enclosure sensor temperature warning
Hi, getting a warning on an out-of warranty PS6000:
"Control module 1 SES enclosure sensor temperature of 66C is above the warning threshold of 65C".
Had a clean out and the fans all seems to be working. Can anyone tell me which specific part it's referring too please? I'd like to have a look at sourcing a refurbished replacement part.
I'm guessing it will need a whole new/refurbed controller model 70-0202 (type 7). if so, any way to confirm this part number please? Thanks.
No Events found!
dwilliam62
4 Operator
•
1.5K Posts
0
November 7th, 2018 08:00
Hello,
There are only two controller types available for a PS6000, the Type 7 (GbE) and the Type 10 (10GbE).
Just remember to take the compact flash card from the told controller to install on the replacement.
Regards,
Don