This post is more than 5 years old
2 Posts
0
436
February 19th, 2010 07:00
RAID 5 lun size.
I'm getting my first introduction to SANs on a CX3-40. I've created a lun and I'm confused about the size.
I've created a RAID 5 lun using 10-133GB disks. When I look at the properties of the lun, it shows raw capacity of 1006GB and User capacity of 906GB. I'd run the calculation beforehand, and was expecting something along the lines of 1197GB.
What am I missing?
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
February 19th, 2010 19:00
dynamox
9 Legend
•
20.4K Posts
0
February 22nd, 2010 07:00
mbxgjmallory
2 Posts
0
February 22nd, 2010 07:00
That is exactly what I'm doing wrong.
Thanks!