PPME for Linux host

everything that you need to know to use PPME for Linux is documented in the paper.

I found white paper for windows host. But I could not find for Linux host. The user guide is helpful though. I am looking for white paper if any.

PowerLink is going bye bye soon, it’s better to link to ECN Support

https://support.emc.com/docu32215_PowerPath-Migration-Enabler-5.6-User-Guide.pdf?language=en_US

For linux host also the information is available in the guide available at Powerlink. I checked and noted that i had EMC® PowerPath® Migration Enabler Version 5.5 P/N 300-010-686 REV A03 which has sections both for windows and for Linux

Hello,

You will find the documention on PowerPath Migration Enabler on Powerlink:

Home > Support > Technical Documentation and Advisories > Software ~ P-R ~ Documentation > PowerPath Family > PowerPath Migration Enabler

The guides are not specific to a single OS.  You will find the different platforms are very similar, with the exception of native device support.

Hope this helps

What type of migration are you trying to perform? Host Side or array Based.

If you are trying to perform array base then the following is mirror view document

Mirror View

https://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/km/live1/en_US/Offering_Technical/Technical_Documentation/300-011-852.pdf?mtcs=ZXZlbnRUeXBlPUttQ2xpY2tDb250ZW50RXZlbnQsZG9jdW1lbnRJZD0wOTAxNDA2NjgwNWYyZjZlLG5hdmVOb2RlPVNvZndhcmVEb3dubG9hZHMtMQ__

The link dynamox has shared is very use full.

I have linux cluster. Do I have to shut 2nd node down and perform all the ppme and cutover and bring 2nd node up and reboot the primary node so that pp psuudo names will be refreshed.

I know in ms cluster it should be done on active node, but linux is active/active so do I have to shut 2nd node down??