This post is more than 5 years old
4 Posts
0
1593
January 26th, 2012 11:00
Migrate data to EMC VNX 5300
Hi, Lately we have purchased an EMC VNX 5300 and I need to migrate some servers from the old SAN Storage (Not EMC) to the new EMC. Some are windows 2000 and 2003 servers and others are AIX servers. Can anyone provide me with a procedure ? is there any restrictions?
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
January 26th, 2012 13:00
even though this document says migration from Clariion , the process is very similar. You would be doing a “pull” operation from the 3rd party array
http://www.emc.com/collateral/hardware/white-papers/h8173-migrating-clariion-vnx-san-copy-wp.pdf
dynamox
9 Legend
•
20.4K Posts
0
January 26th, 2012 12:00
if you have any of these arrays you could take advantage of San Copy product that comes free of charge with VNX
dynamox
9 Legend
•
20.4K Posts
0
January 26th, 2012 12:00
what array are you migrating from ?
ShadowWorker
4 Posts
0
January 26th, 2012 12:00
Apparently the migration include HP and IBM storage, but I don't know the exact products.
ShadowWorker
4 Posts
0
January 26th, 2012 13:00
thanks for the reply, do you recommend any document that describes the proces of SAN copy?