Unsolved
This post is more than 5 years old
1 Message
2
1833
April 14th, 2011 18:00
Is it possible to run Navisphere and Unisphere on the same box?
If so, does anyone have any sizing requirements of how large this box should be?
Unsolved
This post is more than 5 years old
1 Message
2
1833
April 14th, 2011 18:00
If so, does anyone have any sizing requirements of how large this box should be?
Top
PDE1
10 Posts
0
May 11th, 2011 11:00
Navisphere and Unisphere user interfaces are both part of the array operating environment. Unisphere was first available with FLARE 30. If you are looking to set up a Navisphere or Unisphere off-array management station, I have attached EMC install instructions for both. I recommend opening a service request with EMC, to determine if it's possible to install both on the same server.
2 Attachments
Navisphere off-array Mgmt Station.pdf
Unisphere off-array Mgmt Station.pdf
Rohitmu
5 Posts
0
May 18th, 2011 08:00
Yes it can be done. Only thing is that both wont be evoked at the same time. If it is Flare 29 it will be Navisphere, if it is Flare 30 Unisphere will be evoked.
RRR
4 Operator
•
5.7K Posts
0
May 19th, 2011 00:00
Do you mean connecting to the software on a Clariion or running it on your pc ? You can't run it on your pc, but you can connect to arrays running either one.
jhune1
5 Posts
0
September 14th, 2011 13:00
I think I have the same question, can I install Unisphere (specifically 1.1.25) on a management server which is also running Navisphere? Can they run together on the same management server? We still want to use Navisphere for legacy CX, and Unisphere for our new VNX.