Unsolved
This post is more than 5 years old
13 Posts
0
1606
June 21st, 2012 04:00
Getting error when try to remove the device from powerpath!!
I tried to remove the DMX luns from powerpath control .But it trigger error while I run the command
- Powermt remove dev=”xxxx” …. It says cannot remove the device that is in use.
But the device is not in use and its removed from ASM and OS level.
OS: Sun Os - DMX 3
No Events found!
Phukon
337 Posts
0
August 3rd, 2012 00:00
Have you fixed the issue?
Could you unmount the file system and remove any logical devices associated with it?
If necessary, varyoff any applicable Volume Groups, Run powermt display dev=all and make note of the hdisks associated with the hdiskpower device to be removed.
regards,
phukon.
RRR
4 Operator
•
5.7K Posts
0
August 17th, 2012 05:00
did you unmask the device from the HBAs? If you did PPath shouldn't be able to see them anymore.