Unsolved
This post is more than 5 years old
1 Rookie
•
38 Posts
0
593
September 5th, 2012 03:00
Cisco MDS 9506 - replacing a Qlogic CNA Card and MDS switch changes
Hi
I have been tasked with replacing a faulty QLogic QME8142 Dual Port CNA card.
What changes are required to be completed on our CISCO MDS 9506 switches?
Thanks
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
September 5th, 2012 03:00
i assume somewhere in your fabric you have a FCOE capable switch of FCOE line card ? You will need to update your zoning alias (device alias or fc alias ..depends on what you currently use) and re-activate active zoneset.