Unsolved
1 Rookie
•
2 Posts
0
2
November 6th, 2025 14:57
Adding a new network to ESXi cluster on PowerEdge MX chassis
We have created a new network "vlan700" on distributed switch. But servers are not connecting outside of configured network on the DS.
Looking at the Uplinks of the MX chassis we do not see the new vlan700 network in the properties field. We see other networks that are originally allowed during MX Chassis setup.
Network team confirms trunk and path are correct. Is there something I need to do at the chassis level to allow this new vlan?
Looking at the OME-M console I do not see any profiles or templates configured
No Events found!