This post is more than 5 years old
6 Posts
1
8338
April 18th, 2016 04:00
WinPE10 Driver Cab Import Failing
We are using SCCM 2012 R2 SP2 + CU3 (v5.0.8239.1403) with the Windows 10 ADK v1511 (with additional hotfix https://support.microsoft.com/en-us/kb/3143760)
We also have Dell Command integration suite for SCCM2012 v 4.1.0.360 installed.
We've added the new WinPE10 boot images into SCCM but when we try to add the latest Dell WinPE10 driver cab (WINPE10.0-DRIVERS-A03-2K3RC.CAB) via the dell command tool we are getting an error saying 'The selected driver library version is not compatible with the SCCM boot image version.'
any ideas?
No Events found!
dguidry800
4 Posts
3
December 19th, 2016 10:00
OK, so I found something of an easy workaround. I had two boot images listed with a version of 10.0.10240.16384 and two boot images listed with a version of 10. I ended right-clicking each image labeled just 10 and manually changed the version to 10.0. I then ran it again and it detected successfully. Afterward it displayed all of my boot images and I was able to select the 10.0.10240.16384 images.
Very odd, but it worked. Seems that the Dell software is just looking for any images with a version of '10.0'.
pramodtvm
29 Posts
0
April 21st, 2016 00:00
Hi CUMBRIANBLUES,
Can you please change WinPE Boot image version to 10.0 and retry to import WinPE image? This additional check happening in DCIS 4.1. I believe this issue will get fixed in the next release of DCIS.
ghwright3
5 Posts
2
June 2nd, 2016 09:00
I'm having the same problem but running the newest versions of the ADK and DCIS 4.2, and this doesn't work...
dguidry800
4 Posts
0
December 15th, 2016 12:00
Any update on this? I'm getting this as well in DCIS 4.2. Running ConfigMgr current branch 1606.
nancycasas
2 Posts
0
December 16th, 2016 22:00
Same problem here. It's driving me nuts.
jackb27
4 Posts
0
December 26th, 2018 15:00
I just had this same problem with DCIS 5.0 on SCCM 1810 with ADK 1809 installed
after changing the version of the boot image to 10.0 I had to update distribution points before it would work
is it supposed to be fixed in DCIS 5?