This post is more than 5 years old
10 Posts
0
75589
February 20th, 2015 07:00
WinPE 3.0 Driver CAB A15 and Precision T5810
What models is this supposed to work with?
Here is my usual method of imaging-
- create my image
- sysprep image
- Inject WinPE 3.0 driver cab
- Deploy image and it boots on almost everything.
The last CAB I used was A12. Since we just received a Precision T5810, i thought I would update to A15. So I injected my usual image with A15 and it booted fine, but then I found that sysprep would not work. So I injected another image with A15 and it will not boot at all. Now I'm not sure whats going on.
I get the error on bootup: Failed to load because a required file is missing or corrupt: megasas2.sys
No Events found!
daviducl
10 Posts
0
September 16th, 2015 04:00
So I made a fresh image and injected:
A15 and A16 WinPE 3.0 driver cabs- didnt work.
Precision 6 series family cab- didnt work
T5810 storage driver(which is already in both the above cabs)- works.
I am confused :emotion-18: