Windows 7 and NVMe Imaging Issues

Hello All,

I looked around the forums to see if anyone has come across this issue.

When I image from the K2000 on any system that has a NVMe drive (Optiplex 7440 AIO, Latitude 7470). My imaging speeds are horrendously slow. I image over a gigabit connection and I only see speeds of 10-15MBps. I tested this with older machines using the SATA interface including those that use SSD's and my speeds can reach to about 100-200MBps.

A couple of things that I have tried -
I have recreated the KBE environments numerous times. I am using WINPE 10 Driver pack.
The network admins have verified that there are no networking issues with the K2000.
I installed Windows 7 with NVME drivers integrated and their is no issue.

I believe it has something to do with the boot environment not having NVMe drivers. I have found NVMe drivers that I could include in the boot environment but I wanted to see if anyone has seen this issue.

I created a custom Windows 7 disc using the following instructions -
support.software.dell.com/.../185551

Thanks,
Roland C.