Unsolved
This post is more than 5 years old
2 Posts
0
29273
October 24th, 2012 02:00
SCCM OSD and Intel 825xx Nic's
Hi all
I'm having a major issues producing working builds of Windows xp through SCCM2007 with any device using the Intel 825xx series network cards.
The images boot into win PE fine and deploy the reference image then when it reboots and windows starts it does not pick up a working network card. I know they are the right drivers in the cab file as manually installing them from the cab works fine but it just doesnt pick it up when windows starts.
I've tried mounting the wim file used and dropping the inf, sys and dll's into windows and using DISM to import them into the pxe wim but nothing is any different.
I have the same problems with the Latitude E6430, 6510 and now the Optiplex 7010 because they all use the same chipset, any ideas?
yellowsub456
3 Posts
0
November 3rd, 2012 12:00
On the XP image, why don't you try adding the drivers on the image and add that path to sysprep.
I only add the network drivers on the image if any other drivers aren't loaded at least these are to be able to continue the TS.
Wayne504
1 Message
0
November 27th, 2012 13:00
Have you found a fix to this problem? I am having the same problem with the E6430 with Win 7 x64. I have found
that the drivers in the CAB files aren't Microsoft Signed so MDT 2012 will not import them. I have tried
to force the install using DISM which appears to be successful however my deployments still fail.
I get the following after the .wim file is loaded
File: ifM63x64.sys
Status: 0xc0000098
Info: Windows failed to load because a required file is missing, or corrupt.